• CHEAP DIY drone Build log and test flights octocopter

    Here i show you a short log of the build, programming and the first test flights of an octocopter made out of aluminium rails and the APM Flight control You can buy the APM 2.6 Flight control here : http://amzn.to/1PzqSBZ Please subscribe and Like for more :)

    published: 31 Dec 2015
  • From a diy Arduino quadcopter to a versatile octocopter flight controller.

    In this build / maiden flight video I’m building a octocopter for my own flight controller. Check my website for more information: http://www.brokking.net/rpas_main.html Watch the next part to see the carbon fiber upgrade: https://youtu.be/8A23UG0VPpo

    published: 08 Oct 2015
  • Structure from Motion Octocopter - Computerphile

    Thanks to Audible for supporting our channel. Get a free 30 day trial at http://www.audible.com/Computerphile Creating 3D models with an Octocopter, a camera and some custom software. Christian Mostegel, Research Assistant at TU Graz in Austria explains some of the technology behind the 3D Pitoti Project. More about 3D Pitoti: http://bit.ly/computerphile_rockscanner Finite State Automata: https://youtu.be/vhiiia1_hC4 CPU vs GPU: https://youtu.be/_cyVDoyI6NE 3D Rock Art Scanner: https://youtu.be/Ahdnkj77rAY Brain Scanner: https://youtu.be/TQ0sL1ZGnQ4 http://www.facebook.com/computerphile https://twitter.com/computer_phile This video was filmed and edited by Sean Riley. Computer Science at the University of Nottingham: http://bit.ly/nottscomputer Computerphile is a sister project t...

    published: 05 Feb 2016
  • Carbon fiber upgrade of my personal designed octocopter drone.

    Don’t forget to visit my website: http://www.brokking.net In this video I’ll show you the carbon fiber upgrade of my personal designed octocopter. Previous video: https://www.youtube.com/watch?v=G52LtnBRG5w Weight without batteries: 1210 grams. Weight with two 3S/3800mAh/20C batteries: 1830 grams. Flight time without payload: 23 minutes (hover / no wind). Motor diagonal: 700mm.

    published: 19 Feb 2016
  • Mini-Octocopter: DJI Snail Antriebsset Unboxing (#02)

    In Teil 2 dieser Videoserie führen wir ein klassisches Unboxing des neuen DJI Snail Antriebssystems durch und zeigen dabei viel wissenswertes zu der neuen Regler- Motorenkombination auf. Die Komponenten des Copters - also unter anderem auch das hier vorgestellte DJI Snail Antriebssystem können bei Globe-Flight.de bestellt werden.

    published: 18 Jan 2017
  • Flipping the wrong switch is causing a very stressful 1km octocopter flyaway.

    Looking at the sky and seeing a whole lot of sky…… but no octocopter. We all seen the DJI Phantom and Inspire 1 flyway’s. But this can also happen when you are not paying attention and accidentally flip the wrong switch on your transmitter. See the build of this octocopter here: https://www.youtube.com/watch?v=G52LtnBRG5w And the playlist: https://www.youtube.com/watch?v=lW7NbzqJ_5w&list=PL0K4VDicBzsgMF4rrGlGWlBwrtJMf0Dmp

    published: 15 Nov 2015
  • 15 Multirotor Tips when building and flying - Quadcopter / Hexacopter / Octocopter

    I wanted to take a moment to share with everyone some tips for multirotors (quadcopters, hexacopters, tricopters, octocopters). Whether you're going to be building one or already built or bought one you will want to remember all of these things. 1. Check all solder joints well 2. Tighten all screws (once you know everything is good - locktite) 3. GPS/Compass facing front 4. Flight Controller facing front 5. Use foam on flight controller - http://shop.dubro.com/p/1-4-r-c-protective-foam-rubber-qty-pkg-1?pp=12 6. Balance props 7. Tighten prop adapters 8. Velcro on battery and velcro strap 9. Setup battery failsafe 10. Setup radio failsafe 11. Range test with radio/receiver 12. Make sure GPS is locked in before flying 13. Keep multirotor balanced (battery/cameras) 14. Explain RTL/...

    published: 25 May 2014
  • Tarot T1000 Octocopter maiden flight with 3 axis gimbal and Radian System

    Subscribe to this channel here: http://www.youtube.com/subscription_center?add_user=Locoracers Did the maiden flight today with my Tarot T1000 and the 3 axis gimbal. Went surprisingly flawless. Sorry for the bad quality of the Canon 600D but it was already getting dark and I do not have a fix lens at the moment. Will get one soon :-). This represents basically the flight done after coming straight from the building bench. The Radian System has been setup just on the bench before that flight and you can see that the stabilization is pretty good. I have also tried to use the Tarot ZYX GS System but was not able to get really decent results out of it. Also it seemed to me that the gains were not stable (Temp Drift e.t.c.) No color correction or warping has been applied to the footage. Se...

    published: 06 Oct 2013
  • Tarot T1000 Octocopter 2nd flight with 3 axis gimbal and Radian System

    Second flight, this time using a Sony HDR-PJ650 Camera with integrated optical stabilizer. The 650 is the successor of the famous 730 camera from Sony that carried the first really working optical stabilization system and is quite famous around multicopter flyers. Find the Maiden Flight of the Tarot here with the Canon D600: http://youtu.be/x-rmqQBHJoU Sensitivity of the DJI Wookong has been set initially to approx. 190-200 on all parameters. I have set up the rig to allow a camera operator controlling the gimbal independently using a Futaba T14SG as second TX. Some technical details: - Flightcontroller DJI Wookong-M - 8 Motors (Tarot 4114/320) and ESC (DUALSKY XC4018CA Brushless ESC 40A) - 3 axis Gimbal is powered from a Castle BEC 20A and a 3S battery - Props are Silentwing Carbon 1...

    published: 27 Oct 2013
  • The astounding athletic power of quadcopters | Raffaello D'Andrea

    In a robot lab at TEDGlobal, Raffaello D'Andrea demos his flying quadcopters: robots that think like athletes, solving physical problems with algorithms that help them learn. In a series of nifty demos, D'Andrea show drones that play catch, balance and make decisions together -- and watch out for an I-want-this-now demo of Kinect-controlled quads. TEDTalks is a daily video podcast of the best talks and performances from the TED Conference, where the world's leading thinkers and doers give the talk of their lives in 18 minutes (or less). Look for talks on Technology, Entertainment and Design -- plus science, business, global issues, the arts and much more. Find closed captions and translated subtitles in many languages at http://www.ted.com/translate Follow TED news on Twitter: http://www...

    published: 12 Jun 2013
  • Surprisingly Powerful Hexacopter YOU MUST SEE

    Learn how to make a Very Powerful HEXACOPTER / Drone at home. Buy Stuff here: ESC : https://goo.gl/fqqFIF Anti-Vibrator : https://goo.gl/9fZZut APM 2.6: https://goo.gl/Uf48Yh Motor: https://goo.gl/IaUX77 Promo Code: https://goo.gl/1e2Fv7 https://goo.gl/a4pX7D For India: ( best big size drone suggestion for quad) Transmitter & Receiver: http://amzn.to/2pGE3dL http://amzn.to/2qqUagy Motor with esc: http://amzn.to/2p7eOOC Frame : http://amzn.to/2oW1tN1 apm: http://amzn.to/2qx3I6D Take amazing pictures with this drone camera. You can make quadcopter or octacopter with same methodology. There are many more Interesting videos available in this channel "Indian Life Hacker "...

    published: 18 Feb 2017
  • My new diy quadcopter fligh controller for autonomous flight. Bye Bye Arduino Uno

    In this video I show my new personal designed multicopter flight controller and explain some of it's features. Check my website for more information: http://www.brokking.net/rpas_main.html

    published: 10 Jul 2015
  • MPU-6050 6dof IMU tutorial for auto-leveling quadcopters with Arduino source code

    This video explains how to program your own inertial measurement unit, or IMU for short, that can be used for auto-leveling (self-balancing) a multicopter. No Kalman filters, no libraries, no difficult calculations, just a simple and easy to understand tutorial that explains how to build an IMU that can be used for auto-leveling a multicopter. Website and Arduino code: http://www.brokking.net/imu.html Part 2: https://youtu.be/j-kE0AMEWy4

    published: 21 May 2016
  • YMFC-3D part 5 – Quadcopter PID controller and PID tuning.

    PLEASE USE THE YMFC-AL (AUTO-LEVEL) SOFTWARE: https://youtu.be/DYpHB-LfloI These videos are just for reference. The new software is much easier to setup and supports almost all transmitters. You can download the Arduino sketch here: http://www.brokking.net/ymfc-al_main.html

    published: 08 May 2015
  • YMFC-3D part 6 - Build your own Arduino quadcopter flight controller with source code..

    PLEASE USE THE YMFC-AL (AUTO-LEVEL) SOFTWARE: https://youtu.be/DYpHB-LfloI These videos are just for reference. The new software is much easier to setup and supports almost all transmitters. You can download the Arduino sketch here: http://www.brokking.net/ymfc-al_main.html

    published: 16 May 2015
  • Nostro Mostro first test S1100 Octocopter with Wookong M Gain to low

    published: 16 Nov 2014
  • DJI - Introducing the Spreading Wings S1000

    The S1000 has been specially designed for high level professional aerial photography and cinematography. It comes with retractable landing gear, as well as folding frame arms and propellers to minimize storage space. Every detail has been designed with the needs of creators in mind, helping them to realize their vision while its light weight offers them a longer flight time. Subscribe: http://www.youtube.com/subscription_center?add_user=djiinnovations Like us on Facebook: https://www.facebook.com/DJI Follow us on Twitter: http://www.twitter.com/DJIglobal Follow us on Instagram: http://www.instagram.com/DJIglobal Take a look at our website: http://www.dji.com/

    published: 23 Jan 2014
  • Octocopter ESC Calibration

    published: 08 Oct 2012
  • Octocopter Cinestar + Gimbal 5D + Spektrum DX8 + WKM - First Flight

    Octocopter + Gimbal 5D + Spektrum DX8 + WKM - First Flight Test

    published: 29 Aug 2013
  • A Swarm of Nano Quadrotors

    Check out our latest video: http://www.youtube.com/watch?v=uj0v1BgzUdc Experiments performed with a team of nano quadrotors at the GRASP Lab, University of Pennsylvania. Vehicles developed by KMel Robotics. Special thanks to Professor Daniel Lee for his support.

    published: 31 Jan 2012
  • (3/9) Quadcopter Building for Beginners - The Flight Controller, options and checking

    Consider supporting the channel by visiting http://www.patreon.com/painless360 In this third video in the series we look at the flight controller (a clone of the Seriously Pro F3 flight controller) but this works with Naze32 and other boards based on both of them. We look at what the flight controller actually does and then show how to load Cleanflight and connect to the board for the first time to make sure it's ok. You can see the kit we're using here - http://goo.gl/u3N0Fk Join us in the next video where we look at the frame and working out how to mount all the pieces we have. Thanks for watching, please LIKE and SUBSCRIBE. Happy flying!

    published: 08 Jul 2016
  • Tarot 680pro octocopter engine calibration faild apm+ardupilot

    published: 01 Feb 2015
  • How to setup FailSafe & IOC on Turbo Ace Infinity 9 Octocopter w/ DJI A2 & Futaba 14SG

    Always remove the propeller when you connect to the Assistant Program!!!

    published: 22 Feb 2014
  • Octocopter + Crius

    Октокоптер с автопилотом на базе платы Crius

    published: 12 Sep 2012
CHEAP DIY drone Build log and test flights octocopter

CHEAP DIY drone Build log and test flights octocopter

  • Order:
  • Duration: 10:55
  • Updated: 31 Dec 2015
  • views: 3234
videos
Here i show you a short log of the build, programming and the first test flights of an octocopter made out of aluminium rails and the APM Flight control You can buy the APM 2.6 Flight control here : http://amzn.to/1PzqSBZ Please subscribe and Like for more :)
https://wn.com/Cheap_Diy_Drone_Build_Log_And_Test_Flights_Octocopter
From a diy Arduino quadcopter to a versatile octocopter flight controller.

From a diy Arduino quadcopter to a versatile octocopter flight controller.

  • Order:
  • Duration: 14:52
  • Updated: 08 Oct 2015
  • views: 62937
videos
In this build / maiden flight video I’m building a octocopter for my own flight controller. Check my website for more information: http://www.brokking.net/rpas_main.html Watch the next part to see the carbon fiber upgrade: https://youtu.be/8A23UG0VPpo
https://wn.com/From_A_Diy_Arduino_Quadcopter_To_A_Versatile_Octocopter_Flight_Controller.
Structure from Motion Octocopter - Computerphile

Structure from Motion Octocopter - Computerphile

  • Order:
  • Duration: 7:22
  • Updated: 05 Feb 2016
  • views: 47095
videos
Thanks to Audible for supporting our channel. Get a free 30 day trial at http://www.audible.com/Computerphile Creating 3D models with an Octocopter, a camera and some custom software. Christian Mostegel, Research Assistant at TU Graz in Austria explains some of the technology behind the 3D Pitoti Project. More about 3D Pitoti: http://bit.ly/computerphile_rockscanner Finite State Automata: https://youtu.be/vhiiia1_hC4 CPU vs GPU: https://youtu.be/_cyVDoyI6NE 3D Rock Art Scanner: https://youtu.be/Ahdnkj77rAY Brain Scanner: https://youtu.be/TQ0sL1ZGnQ4 http://www.facebook.com/computerphile https://twitter.com/computer_phile This video was filmed and edited by Sean Riley. Computer Science at the University of Nottingham: http://bit.ly/nottscomputer Computerphile is a sister project to Brady Haran's Numberphile. More at http://www.bradyharan.com
https://wn.com/Structure_From_Motion_Octocopter_Computerphile
Carbon fiber upgrade of my personal designed octocopter drone.

Carbon fiber upgrade of my personal designed octocopter drone.

  • Order:
  • Duration: 7:19
  • Updated: 19 Feb 2016
  • views: 11516
videos
Don’t forget to visit my website: http://www.brokking.net In this video I’ll show you the carbon fiber upgrade of my personal designed octocopter. Previous video: https://www.youtube.com/watch?v=G52LtnBRG5w Weight without batteries: 1210 grams. Weight with two 3S/3800mAh/20C batteries: 1830 grams. Flight time without payload: 23 minutes (hover / no wind). Motor diagonal: 700mm.
https://wn.com/Carbon_Fiber_Upgrade_Of_My_Personal_Designed_Octocopter_Drone.
Mini-Octocopter: DJI Snail Antriebsset Unboxing (#02)

Mini-Octocopter: DJI Snail Antriebsset Unboxing (#02)

  • Order:
  • Duration: 9:06
  • Updated: 18 Jan 2017
  • views: 1215
videos
In Teil 2 dieser Videoserie führen wir ein klassisches Unboxing des neuen DJI Snail Antriebssystems durch und zeigen dabei viel wissenswertes zu der neuen Regler- Motorenkombination auf. Die Komponenten des Copters - also unter anderem auch das hier vorgestellte DJI Snail Antriebssystem können bei Globe-Flight.de bestellt werden.
https://wn.com/Mini_Octocopter_Dji_Snail_Antriebsset_Unboxing_(_02)
Flipping the wrong switch is causing a very stressful 1km octocopter flyaway.

Flipping the wrong switch is causing a very stressful 1km octocopter flyaway.

  • Order:
  • Duration: 9:37
  • Updated: 15 Nov 2015
  • views: 11071
videos
Looking at the sky and seeing a whole lot of sky…… but no octocopter. We all seen the DJI Phantom and Inspire 1 flyway’s. But this can also happen when you are not paying attention and accidentally flip the wrong switch on your transmitter. See the build of this octocopter here: https://www.youtube.com/watch?v=G52LtnBRG5w And the playlist: https://www.youtube.com/watch?v=lW7NbzqJ_5w&list=PL0K4VDicBzsgMF4rrGlGWlBwrtJMf0Dmp
https://wn.com/Flipping_The_Wrong_Switch_Is_Causing_A_Very_Stressful_1Km_Octocopter_Flyaway.
15 Multirotor Tips when building and flying - Quadcopter / Hexacopter / Octocopter

15 Multirotor Tips when building and flying - Quadcopter / Hexacopter / Octocopter

  • Order:
  • Duration: 12:42
  • Updated: 25 May 2014
  • views: 34301
videos
I wanted to take a moment to share with everyone some tips for multirotors (quadcopters, hexacopters, tricopters, octocopters). Whether you're going to be building one or already built or bought one you will want to remember all of these things. 1. Check all solder joints well 2. Tighten all screws (once you know everything is good - locktite) 3. GPS/Compass facing front 4. Flight Controller facing front 5. Use foam on flight controller - http://shop.dubro.com/p/1-4-r-c-protective-foam-rubber-qty-pkg-1?pp=12 6. Balance props 7. Tighten prop adapters 8. Velcro on battery and velcro strap 9. Setup battery failsafe 10. Setup radio failsafe 11. Range test with radio/receiver 12. Make sure GPS is locked in before flying 13. Keep multirotor balanced (battery/cameras) 14. Explain RTL/RTH 15. Use lights at night Recorded using a combination of iPhone 5S and GoPro Hero 3 Black. Thanks for watching. Also if you have a GoPro or are wanting to buy one please join our FaceBook group. https://www.facebook.com/groups/gopro.digital.camera/
https://wn.com/15_Multirotor_Tips_When_Building_And_Flying_Quadcopter_Hexacopter_Octocopter
Tarot T1000 Octocopter maiden flight with 3 axis gimbal and Radian System

Tarot T1000 Octocopter maiden flight with 3 axis gimbal and Radian System

  • Order:
  • Duration: 4:36
  • Updated: 06 Oct 2013
  • views: 75691
videos
Subscribe to this channel here: http://www.youtube.com/subscription_center?add_user=Locoracers Did the maiden flight today with my Tarot T1000 and the 3 axis gimbal. Went surprisingly flawless. Sorry for the bad quality of the Canon 600D but it was already getting dark and I do not have a fix lens at the moment. Will get one soon :-). This represents basically the flight done after coming straight from the building bench. The Radian System has been setup just on the bench before that flight and you can see that the stabilization is pretty good. I have also tried to use the Tarot ZYX GS System but was not able to get really decent results out of it. Also it seemed to me that the gains were not stable (Temp Drift e.t.c.) No color correction or warping has been applied to the footage. Sensitivity of the DJI Wookong has been set initially to approx. 200 on all parameters. Check out the second flight with a Sony Camcorder here: http://youtu.be/4rUDns1nXLU I have set up the rig to allow a camera operator controlling the gimbal independently using a Futaba T14SG as second TX. Some technical details: - Flightcontroller DJI Wookong-M - 8 Motors (Tarot 4114/320) and ESC (DUALSKY XC4018CA Brushless ESC 40A) - 3 axis Gimbal is powered from a Castle BEC 20A and a 3S battery - Props are Silentwing Carbon 15 x 5.5 - Gimbal is a Tarot 5D 3 axis gimbal with Radian System and FF Servos Find Locoracers on Facebook: https://www.facebook.com/pages/Locoracers-RC-Fun/117284075011990?ref=hl See the other flights: http://youtu.be/NwOUCw_wOSE http://youtu.be/4rUDns1nXLU
https://wn.com/Tarot_T1000_Octocopter_Maiden_Flight_With_3_Axis_Gimbal_And_Radian_System
Tarot T1000 Octocopter 2nd flight with 3 axis gimbal and Radian System

Tarot T1000 Octocopter 2nd flight with 3 axis gimbal and Radian System

  • Order:
  • Duration: 3:18
  • Updated: 27 Oct 2013
  • views: 14357
videos
Second flight, this time using a Sony HDR-PJ650 Camera with integrated optical stabilizer. The 650 is the successor of the famous 730 camera from Sony that carried the first really working optical stabilization system and is quite famous around multicopter flyers. Find the Maiden Flight of the Tarot here with the Canon D600: http://youtu.be/x-rmqQBHJoU Sensitivity of the DJI Wookong has been set initially to approx. 190-200 on all parameters. I have set up the rig to allow a camera operator controlling the gimbal independently using a Futaba T14SG as second TX. Some technical details: - Flightcontroller DJI Wookong-M - 8 Motors (Tarot 4114/320) and ESC (DUALSKY XC4018CA Brushless ESC 40A) - 3 axis Gimbal is powered from a Castle BEC 20A and a 3S battery - Props are Silentwing Carbon 15 x 5.5 - Gimbal is a Tarot 5D 3 axis gimbal with Radian System and FF Servos Find Locoracers on Facebook: https://www.facebook.com/pages/Locoracers-RC-Fun/117284075011990?ref=hl
https://wn.com/Tarot_T1000_Octocopter_2Nd_Flight_With_3_Axis_Gimbal_And_Radian_System
The astounding athletic power of quadcopters | Raffaello D'Andrea

The astounding athletic power of quadcopters | Raffaello D'Andrea

  • Order:
  • Duration: 16:09
  • Updated: 12 Jun 2013
  • views: 7008837
videos
In a robot lab at TEDGlobal, Raffaello D'Andrea demos his flying quadcopters: robots that think like athletes, solving physical problems with algorithms that help them learn. In a series of nifty demos, D'Andrea show drones that play catch, balance and make decisions together -- and watch out for an I-want-this-now demo of Kinect-controlled quads. TEDTalks is a daily video podcast of the best talks and performances from the TED Conference, where the world's leading thinkers and doers give the talk of their lives in 18 minutes (or less). Look for talks on Technology, Entertainment and Design -- plus science, business, global issues, the arts and much more. Find closed captions and translated subtitles in many languages at http://www.ted.com/translate Follow TED news on Twitter: http://www.twitter.com/tednews Like TED on Facebook: https://www.facebook.com/TED Subscribe to our channel: http://www.youtube.com/user/TEDtalksDirector
https://wn.com/The_Astounding_Athletic_Power_Of_Quadcopters_|_Raffaello_D'Andrea
Surprisingly Powerful Hexacopter YOU MUST SEE

Surprisingly Powerful Hexacopter YOU MUST SEE

  • Order:
  • Duration: 7:49
  • Updated: 18 Feb 2017
  • views: 40371
videos
Learn how to make a Very Powerful HEXACOPTER / Drone at home. Buy Stuff here: ESC : https://goo.gl/fqqFIF Anti-Vibrator : https://goo.gl/9fZZut APM 2.6: https://goo.gl/Uf48Yh Motor: https://goo.gl/IaUX77 Promo Code: https://goo.gl/1e2Fv7 https://goo.gl/a4pX7D For India: ( best big size drone suggestion for quad) Transmitter & Receiver: http://amzn.to/2pGE3dL http://amzn.to/2qqUagy Motor with esc: http://amzn.to/2p7eOOC Frame : http://amzn.to/2oW1tN1 apm: http://amzn.to/2qx3I6D Take amazing pictures with this drone camera. You can make quadcopter or octacopter with same methodology. There are many more Interesting videos available in this channel "Indian Life Hacker ". My other YouTube Channel: INDIAN LIFE HACKER : Rubik's Cube https://www.youtube.com/channel/UCzzSrj6r9yZOb_9Mh5tDDWw FOLLOW US ON : Facebook : https://www.facebook.com/IndianLifeHacker Twitter : https://twitter.com/HackerIndian Website : indianlifehacker.blogspot.com OTHER VIDEO OF THIS CHANNEL: 3 SIMPLE LIFE HACKS You should Know https://youtu.be/Ca3crBvXQy8 3 SIMPLE LIFE HACKS With Sharpener You should Know https://youtu.be/jV5e0c2yTIo How to Make MINI CANNON at Home | DIY Weapon https://youtu.be/-vgdmo0zxfQ How to Make a SUBMARINE with WATERPROOF CAMERA at home | SUBMARINE https://youtu.be/effHUYo_nCc How to Make a QUADCOPTER with MOTOR at HOME that flies easy https://youtu.be/OWiEyv2Dz6s How to Make a MONEY PRINTER Machine | Magic Trick https://youtu.be/1Mre-524tsg How to make a HOLOGRAM PROJECTOR at home | HOLOGRAPHIC DISPLAY https://youtu.be/YRFapSLewXM HOW TO MAKE PAPER GUN that SHOOT https://youtu.be/Qszq2XC8kYM How to Make a Projector at Home https://youtu.be/SUVqerFEPBY How to Make MAGIC MUD without tonic water with cornstarch https://youtu.be/fjOw5DJ_X6A How to make MOBILE COVER at home With Balloon https://youtu.be/jnGNMMCymPA I have all Rights of this video.
https://wn.com/Surprisingly_Powerful_Hexacopter_You_Must_See
My new diy quadcopter fligh controller for autonomous flight. Bye Bye Arduino Uno

My new diy quadcopter fligh controller for autonomous flight. Bye Bye Arduino Uno

  • Order:
  • Duration: 5:55
  • Updated: 10 Jul 2015
  • views: 39026
videos
In this video I show my new personal designed multicopter flight controller and explain some of it's features. Check my website for more information: http://www.brokking.net/rpas_main.html
https://wn.com/My_New_Diy_Quadcopter_Fligh_Controller_For_Autonomous_Flight._Bye_Bye_Arduino_Uno
MPU-6050 6dof IMU tutorial for auto-leveling quadcopters with Arduino source code

MPU-6050 6dof IMU tutorial for auto-leveling quadcopters with Arduino source code

  • Order:
  • Duration: 13:00
  • Updated: 21 May 2016
  • views: 108426
videos
This video explains how to program your own inertial measurement unit, or IMU for short, that can be used for auto-leveling (self-balancing) a multicopter. No Kalman filters, no libraries, no difficult calculations, just a simple and easy to understand tutorial that explains how to build an IMU that can be used for auto-leveling a multicopter. Website and Arduino code: http://www.brokking.net/imu.html Part 2: https://youtu.be/j-kE0AMEWy4
https://wn.com/Mpu_6050_6Dof_Imu_Tutorial_For_Auto_Leveling_Quadcopters_With_Arduino_Source_Code
YMFC-3D part 5 – Quadcopter PID controller and PID tuning.

YMFC-3D part 5 – Quadcopter PID controller and PID tuning.

  • Order:
  • Duration: 15:47
  • Updated: 08 May 2015
  • views: 145877
videos
PLEASE USE THE YMFC-AL (AUTO-LEVEL) SOFTWARE: https://youtu.be/DYpHB-LfloI These videos are just for reference. The new software is much easier to setup and supports almost all transmitters. You can download the Arduino sketch here: http://www.brokking.net/ymfc-al_main.html
https://wn.com/Ymfc_3D_Part_5_–_Quadcopter_Pid_Controller_And_Pid_Tuning.
YMFC-3D part 6 - Build your own Arduino quadcopter flight controller with source code..

YMFC-3D part 6 - Build your own Arduino quadcopter flight controller with source code..

  • Order:
  • Duration: 9:04
  • Updated: 16 May 2015
  • views: 200692
videos
PLEASE USE THE YMFC-AL (AUTO-LEVEL) SOFTWARE: https://youtu.be/DYpHB-LfloI These videos are just for reference. The new software is much easier to setup and supports almost all transmitters. You can download the Arduino sketch here: http://www.brokking.net/ymfc-al_main.html
https://wn.com/Ymfc_3D_Part_6_Build_Your_Own_Arduino_Quadcopter_Flight_Controller_With_Source_Code..
Nostro Mostro first test S1100 Octocopter with Wookong M Gain to low

Nostro Mostro first test S1100 Octocopter with Wookong M Gain to low

  • Order:
  • Duration: 2:49
  • Updated: 16 Nov 2014
  • views: 211
videos
https://wn.com/Nostro_Mostro_First_Test_S1100_Octocopter_With_Wookong_M_Gain_To_Low
DJI - Introducing the Spreading Wings S1000

DJI - Introducing the Spreading Wings S1000

  • Order:
  • Duration: 4:15
  • Updated: 23 Jan 2014
  • views: 1954682
videos
The S1000 has been specially designed for high level professional aerial photography and cinematography. It comes with retractable landing gear, as well as folding frame arms and propellers to minimize storage space. Every detail has been designed with the needs of creators in mind, helping them to realize their vision while its light weight offers them a longer flight time. Subscribe: http://www.youtube.com/subscription_center?add_user=djiinnovations Like us on Facebook: https://www.facebook.com/DJI Follow us on Twitter: http://www.twitter.com/DJIglobal Follow us on Instagram: http://www.instagram.com/DJIglobal Take a look at our website: http://www.dji.com/
https://wn.com/Dji_Introducing_The_Spreading_Wings_S1000
Octocopter ESC Calibration

Octocopter ESC Calibration

  • Order:
  • Duration: 0:54
  • Updated: 08 Oct 2012
  • views: 330
videos
https://wn.com/Octocopter_Esc_Calibration
Octocopter Cinestar + Gimbal 5D + Spektrum DX8 + WKM - First Flight

Octocopter Cinestar + Gimbal 5D + Spektrum DX8 + WKM - First Flight

  • Order:
  • Duration: 2:43
  • Updated: 29 Aug 2013
  • views: 534
videos
Octocopter + Gimbal 5D + Spektrum DX8 + WKM - First Flight Test
https://wn.com/Octocopter_Cinestar_Gimbal_5D_Spektrum_Dx8_Wkm_First_Flight
A Swarm of Nano Quadrotors

A Swarm of Nano Quadrotors

  • Order:
  • Duration: 1:43
  • Updated: 31 Jan 2012
  • views: 8319460
videos
Check out our latest video: http://www.youtube.com/watch?v=uj0v1BgzUdc Experiments performed with a team of nano quadrotors at the GRASP Lab, University of Pennsylvania. Vehicles developed by KMel Robotics. Special thanks to Professor Daniel Lee for his support.
https://wn.com/A_Swarm_Of_Nano_Quadrotors
(3/9) Quadcopter Building for Beginners - The Flight Controller, options and checking

(3/9) Quadcopter Building for Beginners - The Flight Controller, options and checking

  • Order:
  • Duration: 18:24
  • Updated: 08 Jul 2016
  • views: 34419
videos
Consider supporting the channel by visiting http://www.patreon.com/painless360 In this third video in the series we look at the flight controller (a clone of the Seriously Pro F3 flight controller) but this works with Naze32 and other boards based on both of them. We look at what the flight controller actually does and then show how to load Cleanflight and connect to the board for the first time to make sure it's ok. You can see the kit we're using here - http://goo.gl/u3N0Fk Join us in the next video where we look at the frame and working out how to mount all the pieces we have. Thanks for watching, please LIKE and SUBSCRIBE. Happy flying!
https://wn.com/(3_9)_Quadcopter_Building_For_Beginners_The_Flight_Controller,_Options_And_Checking
Tarot 680pro octocopter engine calibration faild apm+ardupilot

Tarot 680pro octocopter engine calibration faild apm+ardupilot

  • Order:
  • Duration: 2:28
  • Updated: 01 Feb 2015
  • views: 256
videos
https://wn.com/Tarot_680Pro_Octocopter_Engine_Calibration_Faild_Apm_Ardupilot
How to setup FailSafe & IOC on Turbo Ace Infinity 9 Octocopter w/ DJI A2 & Futaba 14SG

How to setup FailSafe & IOC on Turbo Ace Infinity 9 Octocopter w/ DJI A2 & Futaba 14SG

  • Order:
  • Duration: 5:20
  • Updated: 22 Feb 2014
  • views: 5124
videos
Always remove the propeller when you connect to the Assistant Program!!!
https://wn.com/How_To_Setup_Failsafe_Ioc_On_Turbo_Ace_Infinity_9_Octocopter_W_Dji_A2_Futaba_14Sg
Octocopter + Crius

Octocopter + Crius

  • Order:
  • Duration: 1:43
  • Updated: 12 Sep 2012
  • views: 625
videos
Октокоптер с автопилотом на базе платы Crius
https://wn.com/Octocopter_Crius
×